? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 1 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. phase shifter, 4-bit 1.4?2.4 ghz m/a-com products rohs compliant MAPS-008342-PKG003 part status: preliminary rev. a m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. features ? 4-bit phase shifter ? 360o coverage, lsb = 22.5o ? ttl control inputs ? msag? process ? 4 mm, 24 lead pqfn package description the maps-008 342-pkg003 is a bi-directional 4-bit phase shifter with parallel ttl input control and is available in a 24 lead, 4 mm pqfn plastic package. this product is fully matched to 50 ohms on both the input and output. this part has 360o of phase coverage in 22.5o increments. fabricated using m/a-com?s repeatable, high performance and highly reliable gaas multifunction self-aligned gate process, each device is 100% rf tested on wafer to ensure performance compliance. the mttf is 1 million hours at a 170 o c junction temperature. the 4 mm pqfn package is rohs compliant and compatible with industry standard lead-free solder reflow processes up to 260 o c. this low cost package is ideal for high volume micro- wave applications. primary applications ? satellite communications ? inmarsat parameter symbol typical units bandwidth f 1.4-2.4 ghz insertion loss?reference state il 4.0 db rf port 1 vswr all states vswr 1.5:1 rf port vswr all states vswr 1.5:1 peak phase error, all states err -4/+8 o peak to peak gain variation, all states ? gn < 2 db digital supply current i ee < 5 ma input third order intercept itoi 32 dbm input 1-db compression point p 1db 22 dbm ton, toff (50% control to 50% rf) 12 ns trise, tfall (10/90% rf) r 8 ns electrical characteristics: t b = 25c 1 , z 0 = 50 , v ee = -5v 1. t b = mmic base temperature. ordering information description plastic package sample board part number maps- 008342-smb003 tape & reel (500) maps- 008342-tr0500 die maps- 008342-die000 tape & reel (1000) maps- 008342-tr1000
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 2 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. phase shifter, 4-bit 1.4?2.4 ghz m/a-com products rohs compliant MAPS-008342-PKG003 part status: preliminary rev. a m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. parameter symbol absolute maximum units input power p in 30 dbm digital supply voltage v ee |-6 | v junction temperature t j 170 c storage temperature t stg -55 to +150 c characteristic symbol min typ max unit digital supply voltage v ee -5.2 -5 -4.8 v control voltage logic high / on 3 5 5.5 v logic low / off 0 0.2 0.4 v maximum ratings 2 2. operation beyond these limits may result in permanent damage to the part. recommended operating conditions 3 3. operation outside of these ranges may reduce product reliability. truth table 4 designation description level state p4 180o phase bit logic high phase shift = -180o p3 90o phase bit logic high phase shift = -90o p2 45o phase bit logic high phase shift = -45o p1 22.5o phase bit logic high phase shift = -22.5o 4. all phase bits at logic low = reference state. operating instructions this device is static sensitive. please handle with care. reference application note an3016*. this device does not require voltage sequencing.
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 3 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. phase shifter, 4-bit 1.4?2.4 ghz m/a-com products rohs compliant MAPS-008342-PKG003 part status: preliminary rev. a m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. figure 6. rf port 2 vswr vs. frequency & phase state - all states 1 2 3 4 5 6 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 frequency (ghz) vsw r figure 5. rf port 1 vswr vs. frequency & phase state - all states 1 2 3 4 5 6 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 frequency (ghz) vswr figure 4. insertion loss vs. frequency & phase state - all states -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 frequency (ghz) insertion loss (db) figure 3. relative phase shift vs. frequency & phase state - all states -360.0 -337.5 -315.0 -292.5 -270.0 -247.5 -225.0 -202.5 -180.0 -157.5 -135.0 -112.5 -90.0 -67.5 -45.0 -22.5 0.0 1.01.21.41.61.82.02.22.42.62.8 frequency (ghz) phase shift (o) figure 2. typical phase error vs. frequency - all phase states -20 -16 -12 -8 -4 0 4 8 12 16 20 -337.5 -315.0 -292.5 -270.0 -247.5 -225.0 -202.5 -180.0 -157.5 -135.0 -112.5 -90.0 -67.5 -45.0 -22.5 0.0 phase state (o) phase error (o) 1.4 ghz 1.6 ghz 1.8 ghz 2 ghz 2.2 ghz 2.4 ghz figure 1. insertion loss, rf port 1 & 2 vswr vs. frequency - reference state -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 frequency (ghz) insertion loss (db) 1 2 3 4 5 6 vswr insertion loss rf port 1 vswr rf port 2 vswr
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 4 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. phase shifter, 4-bit 1.4?2.4 ghz m/a-com products rohs compliant MAPS-008342-PKG003 part status: preliminary rev. a m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. figure 8. recommended bias configuration. note: the exposed pad centered on the package bottom must be connected to rf and dc ground for proper electrical and thermal operation. refer to m/a-com application note surface mounting instructi ons for pqfn packages #s2083 * for assembly guidelines. *application notes can be found by going to the site search page of m/a-com?s web page (http://www.macom.com/application%20note s/ index.htm) and searching for the required application note. figure 7. 4x4 mm 24-lead pqfn package. v ee 4 control inputs 0.1 f
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macom.com for additional data s heets and product information. 5 advanced: data sheets contain information regarding a product m/a-com is considering for development. performance is based on target spec ifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com has under development. performance is based on engineering tests. s pecifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guarantee d. released: in full production, samples readily available, standard lead times apply. phase shifter, 4-bit 1.4?2.4 ghz m/a-com products rohs compliant MAPS-008342-PKG003 part status: preliminary rev. a m/a-com inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. m/a-com makes no warranty, representation or guarantee regarding the suitab ility of its pr oducts for any particular purpose, nor does m/a-com assume any liability whatsoever arising out of the use or application of any product(s) or information. figure 9. demonstration board pn maps-008342-smb003 (available upon request).
|
